Kenmore 1350 - Stitch Selector; Stitch Length Control

There are certain types of stitches that are
used more often than others in your garment
construction. Because of their frequent use,
you will soon realize the convenience offered
to you by this control. All of the stitches that
are made by this machine are illustrated on
the stitch selector dial. You can obtain your
desired stitch by simply turning the stitch
selector dial.
Zigzag stitch -------
Shell stitch ---------
Blind stitch ---------
Mending stitch —
Smocking stretch
Straight stitch
Buttonhole
-Straight stretch
Overcast stretch
-Serging stretch
Rick-rack stretch
STITCH LENGTH CONTROL
1. Recommended stitch length settings are
indicated in three colors and color coded
with stitch patterns on the selector.
2. Turn the knob toward you to lengthen a
stitch and away from you to shorten.
3. Wide portions of green and yellow zones
are standard setting range for correspond 
ing stitch patterns.
Orange graduation indicates the approx 
imate number of stitches per inch (6-8-12-
24) of both straight and zigzag stitches.
Orange zone
Green zone
Yellow zone
Buttonhole
Straight stitch
Zigzag stitch
Shell stitch
Blind stitch
Mending stitch
Smocking stretch
Rick-rack
Serging
Overcasting
Straight
Buttonhole
zone
11