Kenmore 1350 - Seam Guides; Presser Foot Lever

SEAM GUIDES
Seam guides are printed on needle plate, at
both sides of needle, to help you line up the
fabric and keep it straight. The standard
seam width is 5/8 ” . So these lines are
emphasized, easy to follow.
Also the cross lines are "cornering guides ” to
help when turning a square corner 5/8 ” from
the fabric edge. (For details on cornering, see
page 18.)
PRESSER FOOT LEVER
Presser foot lever has a two position lift.
In order to place heavy fabric under the
presser foot or to change the presser foot
raise the presser foot lever to its maximum
upward position as shown.
13