Kenmore 1350 - Checking Thread Tension, Overcasting, Satin Stitching, Bar Tacking, Appliqueing, Button Sewing Blind Hemming

Pressure regulator
See page 12.
Zigzag foot
Presser foot
For easier blind hemming it is recommended to use
optional accessory item 6885 — adjustable blind hem
foot.
Stitch selector
PROCEDURE
Finish edge of hem anyway you desire. Turn up
hem appropriate width.
Place garment under presser foot in such a
manner that straight stitches will be sewn on
extended edge. The zigzag stitch should just
catch the fold of the garment.
Fold garment away from hem leaving 1/8 ” of
hem edge extending.
Press both sides of the finished hem. The right
side of the garment will show only the blind
stitches.
23