Kenmore 1350 - Buttonhole Making

Buttonhole guide
foot
Pressure regulator
Stitch selector
Stitch length dial
Carefully mark the buttonhole length on your
garment. Place the fabric with the buttonhole
marked under the buttonhole foot. Pull the
guide foot (A) all the way forward so that the
index mark (B) is aligned with the graduation
(C), with thread to rear. (Reproduction of the
identical size buttonholes is facilitated with
the aid of the graduations on the left side of
the buttonhole guide foot. These graduations
are 1 8" apart. Graduations act as reference
mark.)
Set stitch selector at L: and sew several
times at the marked beginning of the
buttonhole. Stop sewing at the left stitch.
Raise needle to its highest position by turning
handwheel toward you manually.
26