EasyManua.ls Logo

Kenmore 15358 - Oiling the Machine; Oil Behind the Face Cover; Oil the Shuttle Area

Kenmore 15358
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Oiling the Machine
NOTE:
Unplug the machine before oiling,
Oil behind the face cover
Remove the face cover and oil the two points, as shown,
at least once a year. One or two drops of oil is sufficient.
Remove excess oil, otherwise it may stain the fabric. In
case the machine has not been used for a long period, oil
it before sewing. Use quality sewing machine oil.
o Oil the shuttle area
Open the shuttle cover by pulling down
part on the left side of the cover.
Oil the point as indicated
drops of oil is
J
72

Table of Contents