Twin Needle Stitches (Option)
Stitch selector:
(_ Presser foot:
Needle thread tension:
@ Stitch length control:
_) Stitch width control:
_) Needle:
*3, 9 or 10
Zigzag foot
1 to4
0_5to 1
1 to2.5
Twin needle (optional item)
*Stitches 9 and 10 are only available for model !52t8.
NOTE: Do not set the stitch width at more than 2..5,
otherwise the needle may hit the needle plate or presser
foot and could possibly break.
(_) Upper thread guide
(_) Check spring holder
(_ Thread take-up lever
@ Needle bar thread guide
(_) Twin needle (optional item)
Turn off the power switch. Pull up the additional spool pin.
Place a piece of felt on the additional spool pin° Make sure
you separate the two threads by placing one thread in each
needle bar thread guide@.
Change the needle to a twin needle(_). Thread each needle
from front to back.
When you want to shift the fabric to change the sewing
direction, you must first raise the needle out of the fabric.
®
®
O ®
STRETCH =====
S V L _0_1_2_3_4
_:_ 0_1_2_3_4_5 _r>
®
.......J
56
To Next Page
Loading...
