Important.
Only use biological chemicals with a pH value of between 7 and 12. These chemicals must be com-
pliant with the laws and regulations of the countries in which they are used. The use regulations for
this machine must be strictly adhered to. Everything else is deemed to be incorrect. The manufac-
turer may not be held liable for any accidents resulting from incorrect use of the machine. This mach-
ine must not, under any circumstances, be taken apart. If the machine is taken apart, the manufactur-
er disclaims all liability in connection with the use and safety of the unit.
Precautions in the event of storage/frost:
If the machine is to be stored in a place where there is a risk of frost, or it to remain unused for more
than 3 months, it is advisable to fill the pump with antifreeze of the same type as used in cars. In low
temperatures, it is possible that some parts will freeze or seize up if the machine has been stored for a
long period of time. Therefore, we suggest that you turn the shaft using the key supplied with the
machine before starting the unit again. This enables the user to check whether the machine is frozen or
is blocked for other reasons. By following these rules before starting, you will avoid the possibility of
destroying the machine. Remember to remove the key from the shaft before starting.
General precautions for use:
1. Keep the machine out of reach of children.
2. The high-pressure jet is dangerous if used incorrectly. In particular, the water jet must not be
directed at persons, animals or electrical components, or at the machine itself. Do not use the
machine if people or animals are within the range of the jet.
3. The user must handle the machine in such a way that he does not constitute a danger to himself or
other persons.
- In particular, the user must avoid working in uncontrollable positions.
- Remember, the high-pressure jet may produce recoil when the gun is open. The pressure
produced by the recoil is less than 20N, approx. 2 kg.
- Use waterproof clothing.
- Use safety goggles and non-slip rubber boots.
- Avoid coming in contact with toxic materials.
4. This machine has been manufactured in accordance with electrical safety regulations.
- In any case, caution shall be exercised when using electrical machinery and, in particular, the
user must not touch electrical parts or components
- All servicing and repairs shall be carried out by a qualified person. Before servicing and repairs
are carried out, the plug must be disconnected from the mains power supply.
- In instances where an extension cord is to be used, steps must be taken to ensure that joints are
watertight and are kept off the ground in order to avoid contact with the water.
5. Do not pull the power cord to disconnect the plug from the mains power supply.
6. Whilst in use, the machine must not be covered nor placed in a location where there is no ventilation.
7. Never allow the machine to run for more than 5 mins with the gun closed as the water in the pump
may become heated and destroy the pump.
8. When the machine is not in use, the trigger on the gun should be locked so that it cannot be opened
accidentally.
9. For safety's sake, use only original spare parts and accessories.
- If the nozzle is to be replaced, the machine must first be turned off and pressure accumulated in
the hose purged.
To Next Page
Loading...