Kenwood DMX5020DABS User Manual

Radio
20
Trac Information (FM only)
You can listen and watch the traffic information
automatically when a traffic bulletin starts.
However, this feature requires a Radio Broadcast
Data System that includes the TI information.
1 Touch [ ] on the left side of the screen.
Touch [TI].
 Traffic information mode is set.
Ñ When the trac bulletin starts
The Traffic Information screen appears
automatically.
Radio Setup (FM only)
You can set tuner related parameters.
1 Touch [ ] on the left side of the screen.
Touch [SETUP].
 Radio SETUP screen appears.
2 Set each item as follows.
■ [AF]
When station reception is poor, automatically
switches to the station that is broadcasting
the same program over the same Radio Data
System network. Default is “ON”.
■ [Regional]
Sets whether to switch to the station only in
the specific region using the “AF” control.
Default is “ON”.
■ [RDS CT]
Synchronizing the Radio Data System station
time data and this unit’s clock.
“ON” (Default), “OFF”
!B5H-0358-07_DMX_E_En.indb 20 2020/09/15 13:45

Kenwood DMX5020DABS Specifications

General

DIN size	2 DIN
Output power	- W
Product color	Black
Ready for iPod	Yes
Disc types supported	No
Audio output channels	- channels