Kenwood DMX5020DABS User Manual

Other External Components
34
External audio/video players—
AV-IN
1 Connect an external component to the
AV-IN input terminal. (P.48)
2 Select [AV-IN] as the source. (P.9)
3 Turn on the connected component and
start playing the source.
To adjust the parking guidelines
NOTE
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make
sure to use the parking brake to prevent the car
from moving.
1 Touch [ON] of [Parking Guidelines] in the
Camera screen. (P.33)
2 Touch [Guidelines SETUP] in the Camera
screen.
3 Adjust the parking guidelines by
selecting the [
] mark.
4 Adjusting the position of the selected
mark.
A
B
C
D
Make sure that A and B are horizontally
parallel, and that C and D are the same
length.
NOTE
• Touch [Initialize] and after touch [Yes] to set all
the [
] marks to the initial default position.
!B5H-0358-07_DMX_E_En.indb 34 2020/09/15 13:45

Kenwood DMX5020DABS Specifications

General

DIN size	2 DIN
Output power	- W
Product color	Black
Ready for iPod	Yes
Disc types supported	No
Audio output channels	- channels