Kenwood DMX5020DABS User Manual

DAB
24
DAB Setup
You can set Digital Radio related parameters.
1 Touch [ ] on the left side of the screen.
Touch [SETUP].
 DAB SETUP screen appears.
2 Set each item as follows.
■ [Priority]
If the same service is provided by Digital
Radio during Radio Data System reception,
automatically switches to Digital Radio. If
the same service is provided by Radio Data
System when reception of the service being
provided by Digital Radio becomes poor,
automatically switches to Radio Data System.
■ [Announcement Select]
Switches to the set Announcement service.
For details, see Announcement setup
(P.24).
■ [Related Service]
When you select “ON”, the unit switches to a
related service (if exists) when a DAB service
network is not available.
Default is “OFF”.
■ [Antenna Power
Sets power supply to the Digital Radio
antenna. Set to “ON” when the Digital Radio
antenna in use is equipped with a booster.
Default is “ON”.
Ñ Announcement setup
When the service for which “ON” is
selected starts, switches from any source to
Announcement to receive it.
1 Touch [Announcement Select] in the DAB
SETUP screen.
 The Announcement Select screen
appears.
2 Touch each Announcement list and set
on or off.
NOTE
• The volume setting during reception of
Announcement service is automatically stored.
The next time the Announcement service is
received, this unit recalls the volume setting
automatically.
!B5H-0358-07_DMX_E_En.indb 24 2020/09/15 13:45

Kenwood DMX5020DABS Specifications

General

DIN size	2 DIN
Output power	- W
Product color	Black
Ready for iPod	Yes
Disc types supported	No
Audio output channels	- channels