Remote control
44
Remote control
This unit can be operated using the remote
control KNA-RCDV331 (optional accessory).
# CAUTION
• Put the remote control in a place where it will
not move during braking or other operations.
A dangerous situation could result, if the
remote control falls down and gets wedged
under the pedals while driving.
Ñ Switch the operation mode
Turn its operation mode switch to “AUD.”
DVD
T V
NAV
AUD
•
•
•
•
Functions of the Remote
control Buttons
• Aim the remote control directly at the remote
sensor on the faceplate.
• DO NOT expose the remote sensor to bright
light (direct sunlight or artificial lighting).
1
2
10
4
7
3
5
6
8
9
1
SRC
Switches to the source to be played.
2
L
Plays or pauses.
For the Radio and DAB sources,
switches the seek mode.
3
Û
When a call comes in, answers the call.
4
VOL R S
Adjusts the volume.
5
R FM+
S AM–
During tuner source, select FM/ AM
band to be received.
6
E
F
Selects the track or file to be played.
For the Radio and DAB sources,
switches to broadcast stations
received by the unit.
7
ATT
Mutes/restores the sound
8
Numeric
Keypad
Allows you to enter the number to
search in the direct search mode.
For details on the direct search mode,
see Direct search mode (P.44).
9
[# BS]
[DIRECT]
Switches to the direct search mode.
For details on the direct search mode,
see Direct search mode (P.44).
10
[DISP]
Switches the screen between the
current source and the App screen
from the connected iPhone/Android.
–
Other
Not used.
Ñ Direct search mode
Using the remote control, you can jump directly
to the tuner frequency.
NOTE
• This operation cannot be performed for the USB
device.
1 Press the [#BS/DIRECT] button several
times until the desired content appears.
The available contents are different
depending on the source type.
■ Radio
Frequency value
2 Enter the number of the content you want
to play using the numeric keypad.
3 Press the [[E] or [F] button.
The content corresponding to the
number you entered is played.
!B5H-0358-07_DMX_E_En.indb 44 2020/09/15 13:45