Kenwood DMX5020DABS User Manual

Controlling Audio
42
Volume Oset
Finely adjust the volume of the current source
to minimize the difference in volume between
different sources.
1 Press the [MENU] button.
 MENU screen appears.
2 Touch [ ].
 Audio screen appears.
3 Touch [Volume Offset].
4 Touch [+] or [−] to adjust the level.
■ [Initialize]
Returns to the initial settings.
* If you have increased the volume first, then
reduced the volume using the “Volume
Offset”, the sound generated if you suddenly
switch to another source may be extremely
loud.
Sound Eect
You can set sound effects.
1 Press the [MENU] button.
 MENU screen appears.
2 Touch [ ].
 Audio screen appears.
3 Touch [Sound Effect].
4 Set each item as follows.
■ [Bass Boost]
Sets the amount of bass boost among
“[OFF]”/ “[1]”/ “[2]”/ “[3]”.
■ [Loudness]
Sets the amounts of boost of low and high
tones.
“[OFF]”, “ [Low]”, “ [High]”
!B5H-0358-07_DMX_E_En.indb 42 2020/09/15 13:45

Kenwood DMX5020DABS Specifications

General

DIN size	2 DIN
Output power	- W
Product color	Black
Ready for iPod	Yes
Disc types supported	No
Audio output channels	- channels