Kenwood DMX5020DABS User Manual

Setting Up
37English
Special Setup
You can setup Special parameters.
1 Press the [MENU] button.
 MENU screen appears.
2 Touch [ ].
 SETUP screen appears.
3 Touch [Special].
 Special screen appears.
4 Set each item as follows.
■ [DEMO]
Set the demonstration mode. Default is “[ON]”.
■ [Software Information]
Check the software version of this unit.
(P.37)
■ [Open Source Licenses]
Displays the open source licenses.
■ [Initialize]
Touch [Initialize] and then touch [Ye s ] to set
all the settings to the initial default settings.
Ñ Software Information
Check the software version of this unit.
1 Touch [Software Information] in the
Special screen.
2 Confirm the software version.
Display Setup
1 Press the [MENU] button.
 MENU screen appears.
2 Touch [ ].
 SETUP screen appears.
3 Touch [Display].
 Display screen appears.
4 Set each item as follows.
■ [Dimmer]
Select dimmer mode.
[OFF]: The display and buttons do not dim.
[ON]: The display and buttons dim.
[SYNC] (Default): Turns the dimmer function
on or off when the vehicle light control
switch is turned on or off.
■ [OSD Clock]
Select if you want to display the clock while
the screen is off, or while watching video files
on USB, etc.
“[ON]” (Default)/“[OFF]”
■ [Screen Adjustment]
Displays the Screen Adjustment screen.
(P.35)
■ [Background]
Changing background image. (P.37)
Ñ Change background image
1 Touch [Background] in the Display screen.
2 Select an image.
*
1
*
1
Select an original image in advance.
!B5H-0358-07_DMX_E_En.indb 37 2020/09/15 13:45

Kenwood DMX5020DABS Specifications

General

DIN size	2 DIN
Output power	- W
Product color	Black
Ready for iPod	Yes
Disc types supported	No
Audio output channels	- channels