Kenwood DNX7160 User Manual

42 DNX series DNX9960/ DNX7160/ DNX7020EX
TV Watching
[1/2] Switches the multi function
display.
[
] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons
appear, you can recall channels on
memory.
For memory of broadcasting stations,
see <Auto Memory> (page 43) or
<Manual Memory> (page 43).
[SEEK] Switches the Seek mode.
The mode is switched in the following
order each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after
another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 43).
Source Control Screen
Switches to source control screen to use
various functions.
1 Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 18).
2 Operation on the Source Control
Screen
2
2
2
1
1
1
[BAND] Switches to TV1 or TV2.
[4], [¢] Select a channel.
Use the [SEEK] to change the channel
tuning sequence.
2 Display the TV Preset List Screen. See
<Preset Select> (page 44).
[
] Switches to the TV screen.
1 Information display
Channel information display
"TV" Band display
"Preset" Memory Number Display
"ch" Channel display
[
] When appears, the text display
is scrolled by touching it.
Multi Function
 

Kenwood DNX7160 Specifications

General

Brand	Kenwood
Model	DNX7160
Category	GPS
Language	English