EasyManuals Logo

Kenwood KDC-BT34U User Manual

Kenwood KDC-BT34U
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
16
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Symptom Remedy
Bluetooth®
Phone sound quality is
poor.
Reduce the distance between the unit and the
Bluetooth device.
Move the car to a place where you can get a better
signal reception.
Voice calling method is
not successful.
“N/A VOICE TAG”
appears.
Use voice calling method in a more quiet environment.
Reduce the distance from the microphone when you
speak the name.
Make sure the same voice as the registered voice tag is
used.
“NOT SUPPORT”
appears.
The connected phone does not support Voice
Recognition feature.
“NO ENTRY” appears.
“NO PAIR” appears.
There is no registered device connected/found via
Bluetooth.
“ERROR” appears. Try the operation again. If “ERROR” appears again,
check if the device supports the function you have
tried.
“NO INFO” appears. Bluetooth device cannot get the contact information.
Sound is being
interrupted or skipped
during playback of a
Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Turn off, then turn on the unit and try to connect again.
Other Bluetooth devices might be trying to connect to
the unit.
The connected
Bluetooth audio player
cannot be controlled.
Check whether the connected Bluetooth audio player
supports Audio/Video Remote Control Profile (AVRCP).
(Refer to the instructions of your audio player.)
Disconnect and connect the Bluetooth player again.
“HF ERROR XX” appears.
“BT ERROR” appears.
Reset the unit and try the operation again. If this does
not solve the problem, consult your nearest service
center.
SPECIFICATIONS TROUBLESHOOTING
Tuner
FM Frequency Range 87.5MHz — 108.0MHz (50kHz space)
Usable Sensitivity(S/N=26dB) 0.71μV/75Ω
Quieting Sensitivity
(DINS/N=46dB)
2.0μV/75Ω
Frequency Response (±3dB) 30Hz — 15kHz
Signal-to-Noise Ratio (MONO) 64dB
Stereo Separation(1kHz) 40dB
MW Frequency Range 531kHz — 1611kHz (9kHz space)
Usable Sensitivity(S/N=20dB) 28.2μV
LW Frequency Range 153kHz — 279kHz (9kHz space)
Usable Sensitivity(S/N=20dB) 50μV
CD player
Laser Diode GaAIAs
Digital Filter (D/A) 8 times over sampling
Spindle Speed 500rpm — 200rpm (CLV)
Wow & Flutter Below measurable limit
Frequency Response(±1dB) 20Hz — 20kHz
Total Harmonic Distortion(1kHz) 0.01%
Signal-to-Noise Ratio(1kHz) 105dB
Dynamic Range 90 dB
Channel Separation 85 dB
MP3 Decode Compliant with MPEG-1/2 Audio Layer-3
WMA Decode Compliant with Windows Media Audio
EN_KDC_BT34U_EN_001B.indd 16EN_KDC_BT34U_EN_001B.indd 16 27/12/2013 2:06:50 PM27/12/2013 2:06:50 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood KDC-BT34U and is the answer not in the manual?

Kenwood KDC-BT34U Specifications

General IconGeneral
BrandKenwood
ModelKDC-BT34U
CategoryCar Receiver
LanguageEnglish

Related product manuals