C
Crystal Brooks DVMSep 8, 2025
How to fix Kenwood Cd receiver when “NO DISC” appears?
- JJeffrey FordSep 9, 2025
If your Kenwood Cd receiver displays “NO DISC”, insert a playable disc into the loading slot.
To Next PageTo Next PageHow to fix Kenwood Cd receiver when “NO DISC” appears?
If your Kenwood Cd receiver displays “NO DISC”, insert a playable disc into the loading slot.
How to fix Kenwood Cd receiver when “MISWIRING CHECK WIRING THEN PWR ON” appears?
If your Kenwood Cd receiver displays “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off, check that the terminals of the speaker wires are properly insulated, and then turn the power back on.
Why is the radio reception poor on my Kenwood Cd receiver?
If the radio reception is poor on your Kenwood Cd receiver, ensure that the antenna is firmly connected.
What to do if my Kenwood Cd receiver does not work at all?
If your Kenwood Cd receiver does not work, try resetting the unit.
How to fix Kenwood Cd receiver when “READ ERROR” appears?
If your Kenwood Cd receiver displays “READ ERROR”, copy the files and folders onto the USB device again. If that doesn't work, reset the USB device or try using another USB device.
Why can't Bluetooth pairing be made on my Kenwood Cd receiver?
If Bluetooth pairing cannot be made on your Kenwood Cd receiver: * Make sure you have entered the same PIN code to both the unit and Bluetooth device. * Delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
How to fix Kenwood Cd receiver when “NO DEVICE” or “READING” keeps flashing?
If your Kenwood Cd receiver displays “NO DEVICE” or “READING” keeps flashing: * Switch off the developer options on the Android device. * Reconnect the Android device. * If this does not solve the problem, the connected Android device does not support [BROWSE MODE].
Why is no Bluetooth device detected by my Kenwood Cd receiver?
If no Bluetooth device is detected by your Kenwood Cd receiver: * Search from the Bluetooth device again. * Reset the unit.
How to fix Kenwood Cd receiver when “NA FILE” appears?
If your Kenwood Cd receiver displays “NA FILE”, make sure the disc contains supported audio files.
How to fix Kenwood Cd receiver when “TOC ERROR” appears?
If your Kenwood Cd receiver displays “TOC ERROR”, make sure the disc is clean and inserted properly.
General| Brand | Kenwood |
|---|---|
| Model | KDC-BT510U |
| Category | Car Receiver |
| Language | English |
