How to fix no sound on my Kenwood Car Receiver?
If you cannot hear any sound from your Kenwood Car Receiver, try the following: First, adjust the volume to make sure it is at an audible level. Second, check all cords and connections to ensure they are properly connected. Third, clean the connectors. Finally, try resetting the unit.
Why is Bluetooth pairing failing on my Kenwood KDC-BT568U Car Receiver?
If you're having trouble pairing your Bluetooth device with your Kenwood Car Receiver, ensure that you've entered the same PIN code on both devices. If the problem persists, delete the existing pairing information from both the receiver and your Bluetooth device, and then attempt the pairing process again.
Why does “COPY PROTECTED” appear on my Kenwood KDC-BT568U?
The message “COPY PROTECTED” appears on your Kenwood Car Receiver because you are trying to play a copy-protected file.
What to do if the disc cannot be ejected from my Kenwood Car Receiver?
If your Kenwood Car Receiver won't eject the disc, try pressing and holding the M button to forcibly eject it. If that doesn't work, reset the unit.
What does “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” mean on Kenwood Car Receiver?
The message “SUBSCRIPTION UPDATED – PRESS ENTER TO CONTINUE.” on your Kenwood Car Receiver indicates that your subscription has been updated.
What to do if “CHAN LOCKED ENTER CODE:” appears on my Kenwood KDC-BT568U?
If “CHAN LOCKED ENTER CODE:” appears on your Kenwood Car Receiver, it means the selected channel is locked. Enter the correct pass code to unlock it.
Important usage instructions, warnings, and cautions before operating the product.
Steps for setting display language, clock, date, and initial system configurations.
Controls and modes for playing media from CD, USB, iPod, and Android devices.
Connecting, pairing, phone operations, and audio playback via Bluetooth.
Adjusting equalizer, levels, effects, and speaker settings.
Solutions for common problems like no sound, wiring errors, and unit not turning on.
Step-by-step instructions for installing the unit in a vehicle.
Detailed wiring diagrams and a list of installation parts.
General| Brand | Kenwood |
|---|---|
| Model | KDC-BT568U |
| Category | Car Receiver |
| Channels | 4 |
| RMS Power Output | 22 watts |
| Peak Power Output | 50 watts |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| AM/FM Tuner | Yes |
| Display Type | LCD |
| Remote Control | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| CD Playback | Yes |
| Pre-out Voltage | 2.5V |
| Frequency Response | 20Hz - 20kHz |
| Compatible Audio Formats | MP3, WMA |
| Pre-out Impedance | 10k ohms |
| Speaker Impedance | 4 ohms |
| Display Color | Variable |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
To Next Page