To Next PageTo Next PageWhy can't I playback at [BROWSE MODE] on my Kenwood KMM-BT504DAB?
If the Kenwood Receiver is not playing back at [BROWSE MODE], ensure KENWOOD MUSIC PLAY APP is installed on the Android device. Reconnect the Android device and select the appropriate control mode. If the problem persists, the connected Android device may not support [BROWSE MODE].
How to improve phone sound quality on a Kenwood Receiver?
If the phone sound quality is poor on your Kenwood Receiver, reduce the distance between the unit and the Bluetooth device. Additionally, move the car to a place where you can get a better signal reception.
What to do if Kenwood Receiver displays “DAB ANT ERR”?
If the Kenwood Receiver displays “DAB ANT ERR”, check the DAB antenna. If using a passive antenna (without a booster), set [DAB ANT POWER] to [OFF].
What to do if Kenwood KMM-BT504DAB displays “CHECK APP”?
If the Kenwood Receiver displays “CHECK APP”, end the Spotify application and restart it, then log in to your Spotify account.
How to improve DAB reception on a Kenwood KMM-BT504DAB Receiver?
If the DAB reception on your Kenwood Receiver is poor, make sure [ON] is selected for [DAB ANT POWER].
What to do if Kenwood KMM-BT504DAB Receiver displays “PROTECTING SEND SERVICE”?
If the Kenwood Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
What to do if Kenwood Receiver USB port is drawing too much power?
If the USB port on your Kenwood Receiver is drawing more power than the design limit, turn the power off and unplug the USB device. Then, turn the power back on and reattach the USB device. If the issue continues, turn the power off and on again (or reset the unit) before trying another USB device.
What to do if Kenwood KMM-BT504DAB Receiver displays “NA FILE”?
If the Kenwood Receiver displays “NA FILE”, make sure the media contains supported audio files.
Why won't my Bluetooth device pair with my Kenwood Receiver?
If you are having trouble pairing your Bluetooth device with the Kenwood Receiver, make sure you have entered the same PIN code on both devices. If that doesn't work, delete the pairing information from both the unit and the Bluetooth device, and then try pairing again.
What to do if Kenwood KMM-BT504DAB displays “NO DEVICE” or “READING” keeps flashing?
If the Kenwood Receiver displays “NO DEVICE” or “READING” keeps flashing, switch off the developer options on the Android device and reconnect the Android device. If the problem persists, the connected Android device may not support [BROWSE MODE].
General| Category | Receiver |
|---|---|
| Brand | Kenwood |
| Model | KMM-BT504DAB |
| Type | Digital Media Receiver |
| DIN Size | 1 DIN |
| Power Output | 4 x 50W |
| Bluetooth | Yes |
| DAB/DAB+ | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| Display Color | White |
| DSP | Yes |
| Time Alignment | Yes |
| Pre-out Voltage | 2.5V |
| Compatible with | Android, iOS |
| Weight | 1.2 kg |
| Audio Formats Supported | MP3, WMA, WAV, FLAC |
| Equalizer | 13-Band Graphic EQ |
| Pre-out | 3 |
Important usage instructions, warnings, and safety cautions for proper operation.
Instructions for connecting USB, iPod, or Android devices and starting playback.
Step-by-step guide to pair and connect a Bluetooth device for the first time.
Procedures for handling incoming and active calls during Bluetooth connection.
Instructions for making calls, storing contacts, and accessing call history.
Guide to setting speaker delays for optimal sound staging in the vehicle.
Solutions for general problems and issues with DAB and analog radio reception.
Troubleshooting steps for Spotify connection and Bluetooth audio playback problems.
Solutions for Bluetooth errors like "DEVICE FULL", "NO PAIR", and "HF ERROR".
