B
Brandon MckeeAug 31, 2025
What to do if Kenwood KMM-BT504DAB displays “NO MUSIC”?
- JJon WalkerAug 31, 2025
If the Kenwood Receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
To Next PageTo Next PageWhat to do if Kenwood KMM-BT504DAB displays “NO MUSIC”?
If the Kenwood Receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
How to stop Kenwood KMM-BT504DAB from skipping during playback?
If you are experiencing intermittent playback or sound skipping on your Kenwood Receiver, turn off the power saving mode on the Android device.
What to do if Kenwood KMM-BT504DAB Receiver displays “USB HUB IS NOT SUPPORTED”?
If the Kenwood Receiver displays “USB HUB IS NOT SUPPORTED”, it means the unit cannot support a USB device connected via a USB hub.
What to do if Kenwood KMM-BT504DAB Receiver displays “iPod ERROR”?
If the Kenwood Receiver displays “iPod ERROR”, try reconnecting the iPod or resetting it.
What to do if Kenwood KMM-BT504DAB Receiver displays “UNRESPONSIVE DEVICE”?
If the Kenwood Receiver displays “UNRESPONSIVE DEVICE”, make sure the device is not malfunctioning and then reattach the device.
What to do if Kenwood KMM-BT504DAB displays “DISCONNECTED”?
If the Kenwood Receiver displays “DISCONNECTED”, ensure that the USB is properly connected to the head unit.
How to improve radio reception on a Kenwood KMM-BT504DAB?
If your Kenwood Receiver's radio reception is poor, connect the antenna firmly. Note that static noise may occur while listening to the radio.
What to do if Kenwood Receiver displays “ANDROID ERROR” or “NA DEVICE”?
If the Kenwood Receiver displays “ANDROID ERROR” or “NA DEVICE”, try reconnecting the Android device or restarting it.
What to do if Kenwood Receiver displays “UNSUPPORTED DEVICE”?
If the Kenwood Receiver displays “UNSUPPORTED DEVICE”, check if the connected device is compatible with the unit and that the file systems are in supported formats. You can also try reattaching the device.
What to do if Kenwood KMM-BT504DAB displays “NO DEVICE”?
If your Kenwood Receiver displays “NO DEVICE”, connect a USB device and change the source to USB again.
General| Category | Receiver |
|---|---|
| Brand | Kenwood |
| Model | KMM-BT504DAB |
| Type | Digital Media Receiver |
| DIN Size | 1 DIN |
| Power Output | 4 x 50W |
| Bluetooth | Yes |
| DAB/DAB+ | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| Display Color | White |
| DSP | Yes |
| Time Alignment | Yes |
| Pre-out Voltage | 2.5V |
| Compatible with | Android, iOS |
| Weight | 1.2 kg |
| Audio Formats Supported | MP3, WMA, WAV, FLAC |
| Equalizer | 13-Band Graphic EQ |
| Pre-out | 3 |
Important usage instructions, warnings, and safety cautions for proper operation.
Instructions for connecting USB, iPod, or Android devices and starting playback.
Step-by-step guide to pair and connect a Bluetooth device for the first time.
Procedures for handling incoming and active calls during Bluetooth connection.
Instructions for making calls, storing contacts, and accessing call history.
Guide to setting speaker delays for optimal sound staging in the vehicle.
Solutions for general problems and issues with DAB and analog radio reception.
Troubleshooting steps for Spotify connection and Bluetooth audio playback problems.
Solutions for Bluetooth errors like "DEVICE FULL", "NO PAIR", and "HF ERROR".
