EasyManuals Logo

Kenwood NX-5200K3 User Manual

Kenwood NX-5200K3
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
o
Backlight <Light>
Press this key to turn the display backlight on or off. If Auto backlight is activated by
your dealer, the backlight can be set to activate by key operations or when receiving
a call/ message.
o
Battery Information
Allows you to check the detailed information of the Intelligent Battery installed on your
transceiver. Refer to “BATTERY INFORMATION DISPLAY” {p. 51} .
o
Battery Status <Battry>
Allows you to view the battery power status. Battery status is represented by the
number of times the LED indicator flashes red. Four flashes represents full power,
three represents medium power, two represents low power, and one represents very
low power. If the LED flashes red only one time, recharge or replace your battery pack
immediately. When the Low Battery Warning function is active {p. 60} and the
battery power is low, this key will not operate.
If the Battery Level Tone has been enabled, a beep tone will sound according to the
number of flashes from the LED.
o
Bluetooth <Btooth>
Enables or disables the Bluetooth function. Refer to “Bluetooth” {p. 63} .
o
Bluetooth Connect/ Disconnect <BtConn/ BtDisc>
Press this key to pair with the selected Bluetooth device when a Bluetooth device is
not connected. When a Bluetooth device is connected, press this key to disconnect
the Bluetooth device.
o
Bluetooth Device
Activates Bluetooth Device mode.
o
Bluetooth Discoverable
Allows the transceiver to respond to the search for Bluetooth-enabled devices.
o
Bluetooth Headset Connection Type
Allows you to select the type of Bluetooth headset to be connected to the transceiver
via HSP connection.
o
Bluetooth Information
Allows you to display the Bluetooth device name of the transceiver.
o
Bluetooth Speaker <BtSpkr>
Allows you to switch the speaker from the transceiver’s built-in speaker to the speaker
of a connected Bluetooth device.
o
Broadcast <B.Cast>
Allows you to make a Broadcast Group Call. Switches between Broadcast Group
Call and Conference Group Call when Broadcast Group Call is enabled.
27

Other manuals for Kenwood NX-5200K3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood NX-5200K3 and is the answer not in the manual?

Kenwood NX-5200K3 Specifications

General IconGeneral
BrandKenwood
ModelNX-5200K3
CategoryTransceiver
LanguageEnglish

Related product manuals