EasyManuals Logo

Kenwood NX-5200K3 User Manual

Kenwood NX-5200K3
83 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
o
CW Message <CW_Msg>
Press this key to send the CW message.
o
Dialing <Dial>
Activates Dialing mode and allows you to enter a dialing code directly to make a call.
o
Digit 10x Down <10x->
Press this key to decrease the Selcall number by 10 with each press.
o
Digit 10x Up <10x+>
Press this key to increase the Selcall number by 10 with each press.
o
Digit 1x Down <1x->
Press this key to decrease the Selcall number by 1 with each press.
o
Digit 1x Up <1x+>
Press this key to increase the Selcall number by 1 with each press.
o
Direct Channel 1 ~ 5 <DR1 ~ DR5>
Press one of these keys to jump to a frequently used zone and channel (pre-
programmed by your dealer). If activated by your dealer, you can set your own Direct
Channels by selecting your desired zone and channel using Direct Channel 1 ~ 5
Select.
o
Direct Channel 1 ~ 5 Select
Allows you to set the currently selected zone and channel as the Direct Channel 1 ~
5.
o
Display Format <Disp>
Allows you to switch the display between the zone-channel number and the channel
name.
o
Eject SD Card <Eject>
Allows you to eject the microSD card.
o
Emergency
Refer to “EMERGENCY CALLS” {p. 44} .
o
External Mic Sense
Activates External Mic Sense mode.
o
External Speaker <Spkr>
Switches the speaker from the transceiver’s built-in speaker to an optional external
speaker.
o
Fixed Volume <FixVol>
Allows you to change the volume level of the tone.
29

Other manuals for Kenwood NX-5200K3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenwood NX-5200K3 and is the answer not in the manual?

Kenwood NX-5200K3 Specifications

General IconGeneral
BrandKenwood
ModelNX-5200K3
CategoryTransceiver
LanguageEnglish

Related product manuals