o
TX Audio Equalizer (Low Midrange)
Allows you to set the audio response for low midrange frequencies.
o
TX Audio Equalizer (Low)
Allows you to set the audio response for low frequencies.
o
TX Auto Gain Control
Allows you to set the transceiver to automatically adjust the microphone sensitivity
for easy listening.
o
Vibrator <Vib>
Allows you to toggle the vibrator function ON and OFF. When the vibrator is on, the
transceiver will vibrate when a call is received.
o
Voice Memo <Memo>
Allows you to record audio near the transceiver manually.
o
VOX <VOX>
Allows you to adjust the VOX Gain level.
o
VOX Function
Activates the VOX function. Refer to “VOICE OPERATED TRANSMISSION
(VOX)” {p. 59} .
o
Zeroize <Zero>
Allows you to delete the Encryption keys stored in a Secure Cryptographic Module
(SCM), configured in the built-in DES or configured with Enhanced Encryption.
o
Zone Delete/ Add <Zn_D/A>
Allows you to include or omit each Zone in the Multi-Zone scan sequence.
o
Zone Down <Zone->
Press this key to decrease the zone number. {p. 4}
o
Zone Select
Turn the Selector knob clockwise to increase the zone number and counterclockwise
to decrease it. {p. 4}
o
Zone Up <Zone+>
Press this key to increase the zone number. {p. 4}
37
To Next Page
Loading...
Need help?
General
