–
While Caller ID list is displayed:
[H]: Caller ID > CH > Time Stamp
[I]: Caller ID > Time Stamp > CH
–
While Status Message list or Short Message list is displayed:
[H]: Message > Caller ID > CH > Time Stamp
[I]: Message > Time Stamp > CH > Caller ID
●
To delete the selected message, press the [ ] or [#] key. To delete all messages,
press and hold the [
] or [#] key for one second.
3
Press [
] to return to normal operation.
SHORT MESSAGES
This transceiver can receive short data messages which contain a maximum of 48
characters.
●
On full key model transceivers, short messages received are displayed the same as Status
messages and are stored in the same stack memory. A maximum of 32, 64 or 128 short
messages can be stored in the stack memory depending on the Short Message Stack
setting of each system.
LONG MESSAGES
To send and receive long messages, you must connect the transceiver to a PC. Ask
your dealer for details.
●
Long messages can contain a maximum of 4096 characters.
GPS REPORT
GPS data can be manually transmitted by pressing the key programmed as [Send
the GPS Data], or by accessing the Menu {p. 14} . If set up by your dealer, GPS data
may be automatically transmitted at a preset time interval.
●
When using the GPS function, you must first connect the VHF/ GPS antenna or UHF/ GPS
antenna.
56
To Next Page
Loading...
Need help?
General
