Kenwood TK-3170 E - Page 12

TK-3170
12
No. Function Choices Display Remarks
Option Signaling
Carrier Only
10 Scan Delete/Add Add ←Default
Delete
11 Beat Shift NO ←Default
YES
12 Compander NO ←Default
YES
13 Priority Channel NO ←Default
YES
14 Home Channel NO Current zone outside cannot be set up
YES Default=NO
15 Direct Channel NO Default=NO
Display when Direct CH is programmed
1~4 Display when Direct CH is programmed
16 PTT ID OFF Default=OFF
Beginning of Transmit
End of Transmit
Both
17 Beginning of Transmit Code which it can input, 0~9, Not display if Dial ID =Uncheck and PTT ID=OFF,
A~D, ∗ and #, maximum of or EOT is set
16 digits. Display of the current setting
(If it is 8 or more digits, scroll it)
Display when a code is input
(Input it with DTMF key)
Blank [Side1] : Data clear
18 End of Transmit Code which it can input, 0~9, Not display if Dial ID =Uncheck and PTT ID=OFF,
A~D, ∗ and #, maximum of or EOT is set
16 digits. Display of the current setting
(If it is 8 or more digits, scroll it)
Display when a code is input
(Input it with DTMF key)
Blank [Side1] : Data clear
BCL _CARR
S CAN_ ADD
S CAN_DE L
SHF T _ YES
COMP _ Y E S
P RCH_ YES
HMC H _ Y E S
DIRCT _ _ 1
DIRCT _NO
PID_BOTH
12345678
–––––987
––––––––
12345678
–––––987
––––––––
BCL _OPT _
SHF T _NO_
COMP _ NO_
P RCH_NO_
HMC H _ N O _
PID_OFF_
PID_BOT_
PID_EOT_
BOT _ I D_ _
EOT _ I D_ _
REALIGNMENT (Signaling type for Decode = FleetSync/DTMF)