Need help?Do you have a question about the Kenwood TM-D710GE and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TM-D710GE |
| Category | Transceiver |
| Language | English |
Main title of the manual.
Manual version number.
Procedures for accessing repeaters, including offset and tone settings.
Configure offset direction and frequency for repeater access.
Configure tone function, frequency, CTCSS, and DCS for repeater access.
Transmitting a specific tone required by some repeaters.
Swapping transmit and receive frequencies for direct contact.
Automatically checks for simplex signals while using a repeater.
Differentiate between simplex/repeater and odd-split memory channels.
Procedures for storing simplex, standard, and odd-split repeater frequencies.
Recalling, naming, clearing, and transferring memory channel data.
Storing transceiver configurations and usage scenarios.
Storing, recalling, and resetting PM channels.
Overview of scan modes and how scanning resumes after signal detection.
Configuring hold times for Time-Operate and Carrier-Operate scan resume.
Using tone and digital codes for selective signaling.
Setting separate signaling types for TX and RX access.
Manual dialing and automatic storage of DTMF codes.
Settings for transmit speed, pause duration, and key lock.
Storing and transmitting EchoLink connection details.
Configuring the transceiver for EchoLink node operation.
Selecting output power and masking unused frequency bands.
Configuring key beep volume and sound.
Assigning functions to PF1 and PF2 keys on the transceiver.
Assigning functions to PF keys on the microphone.
Locking transceiver and microphone keys to prevent accidental input.
Introduction to GPS, its principles, and positioning formats.
Turning the internal GPS on/off and viewing position data.
Saving and managing movement data including log setup options.
Storing and naming positional information for target points.
Registering, editing, and copying waypoints.
Understanding packet terminal pins, mode indicators, and data bands.
Configuring COM port speed and using external TNC.
Essential commands for TNC operation, connection, and status management.
Configuring APRS beacons, callsigns, and beacon types.
Understanding and configuring the digipeat relay function.
Guidelines for connecting GPS receivers and weather stations.
Manually setting or synchronizing the transceiver's internal clock.
Understanding how received APRS packets are displayed and interpreted.
Recalling, sorting, filtering, and deleting received APRS station data.
Choosing between Followed and Fixed modes for cursor control.
Visual examples of various station data displays on the transceiver screen.
Ordering the station list by callsign, date/time, or distance.
Customizing the station list display by filtering data types.
Understanding message indicators and composing/sending messages.
Composing, sending, and recalling received/transmitted messages.
Setting callsign, beacon type, and APRS lock for operation.
Configuring data band, packet rate, and DCD sense for the internal TNC.
Setting baud rate, input, and output types for GPS/weather devices.
Setting way point formats, names, and output options.
Configuring beacon transmission parameters like speed and altitude.
Managing position comments, custom status text, and QSY transmission.
Choosing and displaying station icons for identification.
Filtering APRS packets based on position limits and data types.
Selecting transmission methods like MANUAL, AUTO, or SmartBeaconing.
Adjusting transmission intervals, decay, and pathing for beacon optimization.
Programming specific routes for packet transmission.
Configuring network protocols and setting up voice alerts for proximity notification.
Configuring transmission of meteorological data via APRS.
Understanding and configuring the digipeat relay function.
Configuring UIFLOOD and UITRACE digipeat processing.
Creating and storing custom phrases for message compilation.
Setting up automatic replies and message group codes for communication.
Customizing beep sounds and display behavior for received data.
Setting units for speed, distance, temperature, position, and grid format.
Optimizing beacon transmission based on speed and direction.
Displaying raw APRS packet data in a terminal window for monitoring.
Displaying DX cluster data and information on local DX stations.
Information on cables and adapters for connecting to an HF transceiver.
Overview of reset options and steps to perform them.
Setting up voice announcements for various transceiver events.
Recording and playing back voice memos and automated responses.
Setting up secret numbers and frequencies for remote control.
DTMF commands used for remote control of the mobile transceiver.
Introduction to remote control system and connecting to HF transceiver.
Initial setup and microphone commands for Sky Command operation.
Assigning callsigns to TNCs and programming tone frequency for Sky Command.
To Next Page
