KERN 572

T572-A-BA-e-2311 27
8.5.1 Switch-over weighing unit
As per standard the change-over button is set so that is it possible to switch-over
between the weighing units by shortly pressing.
Enable unit:
The unit for quick selection can be determined when
the -button is shortly pressed for the first time.
 Press the button and wait until the display
flashes.
 Use the navigation keys  to select the weighing
unit and confirm on ➔ button.
Switch over unit:
 Using button, it is possible to switch over
between the enabled unit 1 and unit 2.