KERN ABS - Setting the Date (ABJ Only)

ABS/ABJ-BA-e-1019
39
6.12 Setting the date (ABJ only)
Menu call:
SEttinG CAL dEF
d-MM-DD
YY-MM-DD
Sequence:
(1) Press and hold the CAL/MENU key until the function setting appears. Press the
TARE/ - key
(2) Press and hold the CAL/MENU key until d-MM-DD appears (MM:month, DD:day)
(3) Press the TARE/ - key in order to set the current date /YY: year, MM: month,
DD: day).
(4) Use the PRINT/ key to select the figure you wish to change (from left to right).
(5) Use the UNIT/ key to increase the numeric value of the selected figure.
(6) Use the ON/OFF/ESC key to return to weighing mode. The setting is stored.