KERN ABS - Setting the Time (ABJ Only); Entering Seconds

ABS/ABJ-BA-e-1019
40
6.13 Setting the time (ABJ only)
6.13.1 Entering seconds
Menu call:
SEttinG CAL dEF
t-HH-MM
SEC AdJ
HH-MM-SS
Sequence:
(1) Press and hold the CAL/MENU key until the function setting appears. Press the
TARE/ - key.
(2) Press and hold the CAL/MENU key until t-HH-MM appears (HH:hour, MM:min.)
(3) Press the TARE/ - key, SEC AdJ will appear.
(4) Press the TARE/ - key to set the desired time. If the TARE/ - key is pressed
between 00 and 29 this will be rounded down to zero sec; if pressed between 30
and 59 this will be rounded up to the next full minute.
(5) Use the ON/OFF/ESC key to return to weighing mode. The setting is stored.