KERN DE - Selection of the Adjustment Weight

DE-BA-e-1052
27
7.4 Selection of the adjustment weight
In the model series KERN DE, the adjustment weight can be selected from three pre-
set nominal values (approx.1/3; 2/3; max) (refer also to table 1 below, factory setting
with grey background). In order to achieve high-quality weighing results in the sense
of the measuring technology, it is recommended to select the nominal value as high
as possible.
DE6K0.5A DE6K1D DE12K1A DE15K0.2D
2000 2000
4000
5000
4000 4000
8000
10000
6000 6000
12000
15000
DE15K2D DE24K2A DE35K0.5D DE35K5D
50000 10000
10000
10000
100000 15000
20000
20000
15000 20000
30000
30000
DE35K5DL DE60K1D DE60K1DL DE60K5A
10000 20000
20000
20000
20000 40000
40000
40000
30000 60000
60000
60000
DE60K10D DE60K10DL DE120K10A DE150K2D
20000 20000
40000
50000
40000 40000
80000
100000
60000 60000
120000
150000
DE150K2DL DE150K20D DE150K20DL DE150K20DLX
50000 50000
50000
50000
100000 100000
100000
100000
150000 150000
150000
150000
DE300K5DL DE300K50D DE300K50DL
100000 100000
100000
200000 200000
200000
300000 300000
300000