KERN EMS Series

2 EMS-BA-e-1716
GB
KERN EMS
Version 1.6 2017-10
Instruction Manual
School balance
Contents
1 Technical data ................................................................................................ 4
2 Basic Information (General) .......................................................................... 6
2.1 Proper use ................................................................................................................................. 6
2.2 Improper Use ............................................................................................................................ 6
2.3 Warranty .................................................................................................................................... 6
2.4 Monitoring of Test Resources ................................................................................................. 6
3 Basic Safety Precautions .............................................................................. 7
3.1 Pay attention to the instructions in the Operation Manual .................................................. 7
3.2 Personnel training .................................................................................................................... 7
4 Transportation & Storage .............................................................................. 7
4.1 Testing upon acceptance ........................................................................................................ 7
4.2 Packaging / return transport ................................................................................................... 7
5 Unpacking, Setup and Commissioning ....................................................... 8
5.1 Installation Site, Location of Use ............................................................................................ 8
5.2 Unpacking/installation ............................................................................................................. 8
5.3 Mains connection ..................................................................................................................... 9
5.4 Operation using a (rechargeable) battery (optional) ............................................................ 9
5.5 Initial Commissioning ............................................................................................................ 10
5.6 Linearization ........................................................................................................................... 11
5.7 Adjustment .............................................................................................................................. 14
5.8 Adjustment .............................................................................................................................. 14
6 Operating elements ..................................................................................... 15
6.1 Overview of display ................................................................................................................ 15
6.2 Keyboard overview ................................................................................................................. 15
7 Operation ...................................................................................................... 16
Start-up ................................................................................................................................................. 16
Switching Off ....................................................................................................................................... 16
Weighing............................................................................................................................................... 16
Taring .................................................................................................................................................... 16
PRE-TARE function ............................................................................................................................. 17
Weighing units switch-over ................................................................................................................ 18
Plus/minus weighings ......................................................................................................................... 18
Parts counting ..................................................................................................................................... 19
Net-total weighings ............................................................................................................................. 20
Percent determination ......................................................................................................................... 21