To Next PageTo Next PageTo Previous PageTo Previous Page
Need help?Do you have a question about the KERN EMS Series and is the answer not in the manual?
General| Weighing plate material | stainless steel |
|---|---|
| Calibration | External calibration |
| Display | LCD |
| Overall dimensions | Varies by model |
| Permissible ambient temperature | 10 °C - 40 °C |
| Interface | RS-232 |
| Protection Class | IP54 (optional) |
Details the intended use of the balance as a non-automatic weighing device.
Warns against dynamic weighing, permanent loads, and explosive environments.
Lists conditions under which warranty claims are voided.
Explains the need for regular checking of measuring properties and test weights.
Emphasizes reading the manual before setup and commissioning.
States that only trained personnel should operate and maintain the appliance.
Advises checking packaging and appliance for damage upon receipt.
Provides instructions for keeping packaging and for return transport.
Provides guidelines for selecting an optimal installation location for accurate results.
Instructions for carefully removing the balance from packaging and placing it.
Details using the external mains adapter and voltage requirements.
Explains how to connect and use a battery for operation, including auto-off.
Details the procedure for performing balance adjustment using recommended weights.
Shows a diagram of the balance's display and main controls.
Provides a table detailing the function of each key on the balance.
Instructions on how to turn on the balance and its self-test sequence.
Instructions on how to properly turn off the balance.
Steps for placing an item and reading the weighing result.
Instructions on how to zero the balance with an empty container or load.
Explains how to store a tare vessel's weight for later use.
How to change between different weighing units (e.g., g, oz).
Describes how to perform plus/minus weighing for quality control.
Explains how to access, select, and change settings within the balance menu.
Provides a table summarizing the available menu items and their functions.
Details how to enable or disable the automatic switch-off function.
Explains how to enable or disable the automatic zero position function.
Allows setting the balance according to ambient conditions and measuring purposes.
Describes how to reset all menu items to their factory default settings.
Instructions on how to clean the balance using mild soap and a soft cloth.
States that only authorized technicians should open the appliance for service.
Advises disposal according to national or regional laws for packaging and appliance.
