KERN EMS Series User Manual

28 EMS-BA-e-1716
Reset to factory
setting
This function resets all menu items to factory setting
 In weighing mode keep the UNIT key pressed until [AF]
appears.
 Press the MODE key twice: „rSt“ is displayed.
 Acknowledge using SET key, the current setting is displayed.
 Select the desired settings by pressing the MODE key
 Use the SET key to confirm selection. The balance returns to
weighing mode.
0.0
g
AF
RST
RST
Qn
0.0
g

KERN EMS Series Specifications

General

Weighing plate material	stainless steel
Calibration	External calibration
Display	LCD
Overall dimensions	Varies by model
Permissible ambient temperature	10 °C - 40 °C
Interface	RS-232
Protection Class	IP54 (optional)