KERN EMS Series User Manual

16 EMS-BA-e-1716
7 Operation
Start-up
 Press the ON-OFF key.
The balance will carry out a self-test The balance is ready
for weighing when the weight display appears.
Switching Off
 Press ON-OFF button, the display disappears
Weighing
 Position item to be weighed
 Read the weighing result in the display
If the material to be weighed is heavier than the weighing
range, the display will show "Error" (=Overload).
Taring
 Place an empty weighing container, the weight of the
weighing container will be displayed.
(Example)
 Press the TARE button, the zero display disappears.
The tare weight is saved until it is deleted.
8.8. 8.8
0
g
0
g
134
g
0
g

KERN EMS Series Specifications

General

Weighing plate material	stainless steel
Calibration	External calibration
Display	LCD
Overall dimensions	Varies by model
Permissible ambient temperature	10 °C - 40 °C
Interface	RS-232
Protection Class	IP54 (optional)