4. Further reference units of 10, 30, 50
and 100 can be called up by repeatedly
operating the key.
Important: The greater the reference
unit, the more accurate the unit count.
5. Place as many items to be counted
on the balance as required by the set
reference unit.
6. Operate the key.
The reference unit is stored.
Now place the items to be counted in the
container. The appropriate number of
items will be shown on the display.
7. Use the key to return to the de-
sired weighing mode.
Information:
If the“L-Err “ error message is displayed, the smallest counting weight has been fall-
en short of – see chap. 1 ”Technical Data“.
To Next Page
Loading...
Need help?
General
