KERN EWB 620-2M

EW/EG-N/EWB-e-1627
40
+
0 I I I F
-
0.000
g
6.2.4.1 Basic settings when weighing using a tolerance range
Operation Display
1. Use the key to switch the balance
on.
Call up the function menu:
Press the key until [Func] appears,
then release.
The first balance mode will appear:
2. Tolerance weighing
Operate the key to call up tolerance
weighing mode.
2.SEL 0 (Off)
2.SEL 1 (ON)
Use the key to change the standard
factory configuration.
3. Tolerance mark display
Operate the key. The tolerance mark
is always displayed (factory setting).
Use the key to change the setting
(1 / 2).
The tolerance mark is only displayed
when the balance display is at a stand-
still.
ο
0 I I I F
0.000
g
Func
1 b.G. 1
2.SEL 0
2.SEL 1
21.Co. 1
21.Co. 2