4. Double again (see item 3)
dditionally applied number of
items increases the reference and im-
proves the counting accuracy.
A particularly high quantity of reference
units must be chosen for small items or
items with greatly varying own weight.
5. Operate the key.
The reference unit is stored.
Now place the items to be counted in the
container. The appropriate number of
items will be shown on the display
Use the key to return to the desired
weighing mode.
Information:
• If the “Add“ error message appears, the applied number of items is too small
for correct determination of the reference. Place further items on the balance
to determine the reference.
• The determined reference is preserved until the balance is disconnected from
the mains.
To Next Page
Loading...
