CB/FCB-BA-e-0640
13
Now press the key. Short time later appears „CAL F“, then return automatically
to the normal weighing mode. In the display there appears the value of the
adjustment weight.
An error during adjustment or the use of an incorrect adjusting weight will result in an
error message „CAL E“. Repeat adjustment.
Keep the adjustment close to the balance. Daily control of the weighing exactness is
recommended for quality-relevant applications.
7 Operation
7.1 Overview of display
7.1.1 Model series CB
7.1.2 Model series FCB
To Next Page
Loading...
