CB/FCB-BA-e-0640
21
7.12 Reset to factory setting
This function allows the reset of all balance settings to the default setting made in
factory before delivery.
Proceed as follows:
Switch-on the balance using the key and wait for the „0“ display.
Press the key and keep it pressed until „UNIT“ appears on the display.
Press the key nine times, in the display appears „rSt“.
Confirm by pressing the key. Use the key to choose between the
following settings:
Display Adjustment
„rSt“ yes
The balance is reset to the default setting
„rSt“ no
The balance keeps its individual setting
Use the key to confirm the selected setting.
After that return to the weighing mode.
To Next Page
Loading...
Need help?
General
