To Next Page

To Previous Page

ITB-BA-e-0720

Settings in the menu

User manual ME-Nr. 22017071 01/07

3.5.2 ACCESS – password for Supervisor menu access

3.5.3 RESET – resetting terminal settings to the factory settings

SUPErVI Password entry for Supervisor menu access

ENtER.C Request to enter password

➜ Enter the password and confirm with

rEtYPE.C Request to repeat the password entry

➜ Enter the password again and confirm with

Notes

• The password can consist of up to 4 characters.

• The key must not be part of the password. It is required for confirming the

password.

• The key may only be used in combination with another key.

• If you enter an impermissible code or make a typing error in the repetition,

COdE.Err. appears in the display.

SUrE? Confirmation inquiry

• Reset terminal settings to the factory settings with

• Do not reset the terminal settings with

KERN ITB User Manual

Other manuals for KERN ITB