ITB-BA-e-0720
4
Introduction
User manual ME-Nr. 22017071 01/07
1 Introduction
1.1 Safety instructions
DANGER!
Electric shock hazard!
▲ Always pull out the mains plug before any work on the device.
DANGER!
Electric shock hazard if the mains cable is damaged!
▲ Check the mains cable for damage regularly and replace it immediately if it is dam-
aged.
▲ On the rear side of the device, maintain a clearance of at least 3 cm in order to
prevent the mains cable bending too much.
CAUTION!
Do not use ITB-balances in hazardous areas!
Our product range includes special devices for hazardous areas.
CAUTION!
Use only scales with Protection Class IP65, if:
• the scale is used in wet areas
• wet cleaning is necessary
• the scale is used in a dusty environment
Even with Protection Class IP65, the scale must not be used in environments with cor-
rosion risk.
▲ Never flood the scale or immerse it in liquid.
To Next Page
Need help?
General
