KERN ITB - Page 26

ITB-BA-e-0720
26
Settings in the menu
User manual ME-Nr. 22017071 01/07
3.6.4 COM1/COM2 -> RESET COM1/RESET COM2 – resetting serial interface to factory
settings
3.6.5 OPTION – configuring options
If no option is installed or is not yet configured, N.A. appears in the display.
NET.Addr not documented
ChECSuM Activating checksum byte (appears only in TOLEDO Continuous mode)
Vcc not documented
SUrE? Confirmation inquiry
• Reset interface settings to factory settings with
• Do not reset the interface settings with
EtH.NEt Configuration of the Ethernet interface
IP.AddrS
• Enter IP address
SUBNEt
• Enter Subnet address
GAtEWAY
• Enter Gateway address
USb not documented
USb TEST
diGitAL not documented
IN 1 ... 4
OFF
ZErO
tArE
PriNt
CLEAr
UNIt
OUT 1 ... 4
OFF
StAbLE
bEL.MIN
AbV.MIN
UNdErLd
OVErLd
StAr