ITB-BA-e-0720
31
Interface description
User manual ME-Nr. 22017071 01/07
4.1.2 Requirements for communication between scale and PC
• The scale must be connected to the RS232 or Ethernet interface of a PC with a suit-
able cable.
• The interface of the scale must be set to "Dialog" mode, see Section 3.6.1.
• A terminal progam must be available on the PC, e.g. HyperTerminal.
• The communication parameters baud rate and parity must be set in the terminal
program and on the scale to the same values, see Section 3.6.3.
To Next Page
Loading...
Need help?
General
