MLB50-3-BA-defsi-0310
45
8.2 Modes “modE“
The following keys are used to set and select the parameters:
Function key – selects the parameters and adopts settings
Used to run through the various parameter settings, numerical entry
from 0-9
Used to change the entry point on the display screen
7 different modes are available.
Mode 1:
Percentage humidity (%)
Weight loss as against initial value
Drying is concluded if the weighing result of three consecutive heating intervals re-
mains unchanged.
Mode 2:
Percentage weight value (%) as against initial value
Drying is concluded if the weighing result of three consecutive heating intervals re-
mains unchanged.
Mode 3:
Percentage humidity as against solid body
Drying is concluded if the weighing result of three consecutive heating intervals re-
mains unchanged.
Mode 4:
Percentage humidity (%)
Weight loss as against initial value
Drying is concluded if the weighing result of three consecutive heating intervals re-
mains unchanged or if the time deadline has expired.
Mode 5:
Percentage weight value (%) as against initial value
Drying is concluded if the weighing result of three consecutive heating intervals re-
mains unchanged or if the time deadline has expired.
Mode 6:
Percentage humidity as against solid body
Drying is concluded if the weighing result of three consecutive heating intervals re-
mains unchanged or if the time deadline has expired.
Mode 7:
Percentage humidity (%)
Weight loss as against initial value
Drying is concluded if the time limit has expired.
To Next Page
Loading...
Need help?
General
