MLB50-3-BA-defsi-0310
48
9.2.2 Taring ( key)
Use the main switch (above the power plug) to switch on the balance. A short warm-
up period of approx. 10 minutes is advisable for stabilisation purposes.
Press the key and wait for the “0“ indication.
Place the jiffy on the weighing pan and press the key. Display again shows “0“.
Now the weight of the jiffy is memorised internally.
By pressing the key after a weighing procedure, “0“ will appear on the display
again.
The taring procedure can be repeated continuously, for instance when mixing several
components. The limit is reached when the full weighing range is overlaid.
After having removed the jiffy the total weight will appear flashing as a minus indica-
tion.
To Next Page
Loading...
Need help?
General
