MLB50-3-BA-defsi-0310
30
1 Technical data
KERN MLB 50-3
Maximum load rating (max.) 50 g
Minimum for drying 0.02 g
Temperature range 50°C-160°C
Setting the temperature in 1°C stages
Pre-heating stage (boost) No
Read off (d) 0.001g /0.01%
Repeatability in weighing
(=standard divergence)
0.001 g
Repeatability during drying
(=standard divergence)
Initial weight 1g
Initial weight 10g
0.2%
0.02%
Please note: recommended minimum weight 2g
Adjusting weight not added 50g (F2)
Ambient conditions 15°C ... 35°C ambient temperature
max. 80% air humidity; not condensing
Shutdown criterion Automatic:
End of drying if the results do not alter during 3
strobe intervals (=heating intervals).
If a time limit has been set drying will shut down
after this period expires.
Adjustable strobe interval: 1 s – 59 s
Manual:
According to set time (10 min to 590 min [=9h 50
min]) (without strobe interval)
Display after drying % humidity = weight reduction
(=residual weight/start weight)*100%
% dry matter = residual weight
(=weight loss/start weight)*100%
% ATRO
(=weight loss/residual weight)*100%
Details are not possible in grammes during drying.
Including sampling trays 10
Protective hood no
Type of projector 2 halogen quartz projectors
200 watts each
Display LED display/ character height 15 mm
3 displays for: - drying status
(depending on configuration)
- temperature
- drying time
To Next Page
Loading...
Need help?
General
