EasyManua.ls Logo

KERN MLS 50-3IR160 - User Manual

KERN MLS 50-3IR160
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MLS-BA-defsi-0713
6
7
GB
KERN MLS
Version 1.3 04/2007
Instruction manual
Electronic Moisture Analyser
Table of contents
1 Technical data_________________________________________________ 69
2 Declaration of conformity _______________________________________ 70
3 Fundamental information (general)________________________________ 71
3.1 Designated use __________________________________________________ 71
3.2 Inappropriate use ________________________________________________ 71
3.3 Protective measures _____________________________________________ 71
3.4 Danger Information_______________________________________________ 71
3.5 Guarantee ______________________________________________________ 72
3.6 Monitoring the test substances_____________________________________ 72
4 Fundamental safety instructions__________________________________ 72
4.1 Observe notices in the operating manual ____________________________ 72
4.2 Training of personnel_____________________________________________ 72
5 Transport and storage __________________________________________ 72
5.1 Acceptance check _______________________________________________ 72
5.2 Packing ________________________________________________________ 72
6 Unpacking, installation and commissioning ________________________
73
6.1 Installation Site, Location of Use ___________________________________ 73
6.1.1 Assembly ___________________________________________________________ 74
6.1.2 Scope of delivery _____________________________________________________ 75
6.2 Mains supply____________________________________________________ 75
6.3 Connection of peripheral equipment ________________________________ 75
6.4 Connection of peripheral equipment ________________________________ 76
6.5 Initial Commissioning ____________________________________________ 76
6.5.1 Rear view ___________________________________________________________ 76
6.5.2 Display _____________________________________________________________ 77
7 Menu_________________________________________________________ 77
7.1 User principle of the menu control __________________________________ 80
7.2 Operating the balance with PS/2 keyboard ___________________________ 82
8 User menu ____________________________________________________ 83

Table of Contents

Questions and Answers

  • J
    Jesus SchneiderAug 10, 2025
    Why does the weight display change continually on my KERN Measuring Instruments?
    • J
      Jessica SandersAug 11, 2025
      If the weight display on your KERN Measuring Instruments is constantly changing, it could be due to several factors. First, eliminate any draughts or air movements that might be affecting the balance. Second, ensure the balance is placed on a stable surface to avoid vibrations. Also, make sure the weighing plate isn't touching any other objects. Finally, electromagnetic fields or static charging can cause fluctuations; try moving the balance to a different location or switching off any nearby devices that might be causing interference.
  • J
    Jessica NguyenAug 20, 2025
    What to do if the weighing result is wrong on KERN MLS 50-3IR160?
    • C
      cassandra92Aug 20, 2025
      If the weighing result on your KERN Measuring Instruments is incorrect or inconsistent, there are several potential causes. Begin by taring the balance to ensure the display is at zero. If the issue persists, recalibrate the balance. Temperature fluctuations can also affect accuracy, so stabilize the temperature environment. Electromagnetic fields or static charging might be interfering; try relocating the balance or switching off nearby devices. Additionally, ensure the sample is homogenous, and if applicable, adjust the drying time or temperature. Clean the temperature sensor.
  • M
    michaelwiseAug 30, 2025
    How to fix weight display if it is not illuminated on KERN MLS 50-3IR160 Measuring Instruments?
    • R
      randy58Aug 30, 2025
      If the weight display on your KERN Measuring Instruments is not illuminated, first ensure that the balance is switched on. If it is on, check the mains supply connection to make sure the mains cable is properly plugged in and not faulty. Also, verify that the power supply is working correctly.

KERN MLS 50-3IR160 Specifications

General IconGeneral
ModelKERN MLS 50-3IR160
CategoryMeasuring Instruments
Maximum Capacity50 kg
MaterialStainless Steel
Measuring range0 kg - 50 kg
Repeatability0.1 g
Readability0.001 kg
Platform Size300 x 300 mm
Power SupplyAC adapter or battery

Related product manuals