MLS-BA-defsi-0713
69
1 Technical data
Data MLS 50-3IR160 MLS 50-3HA160 MLS 50-3HA250
Radiator type
2 Infrared radiators,
300 Watts each
2 Halogen crystal
radiators,
300 Watts each
2 Halogen crystal
radiators,
300 Watts each
Temperature range
50°C - 160°C 50°C - 160°C 50°C - 250°C
Maximum load
50 g
Minimum for drying
0.02 g
Readability (d) at weighing < 1,5 g
0.001 g / 0.01%
Readability (d) at weighing > 1,5 g
0,001 g / 0,001 %
Heating methods
• standard
• fast speed
• stage drying (freely selectable time / temperatura stages)
• Soft
Reproducibility at weighing 2 g
0,5 %
Reproducibility at weighing 10 g
0,02 %
Reproducibility in weighing mode
(=standard deviation)
0.001g
Recommended adjusting weight,
not included (class)
50g (F2)
Ambient conditions
• 10°C ... 40°C surrounding temperature
• max. 80 % air humidity (not condensing)
Turn-off criterion
• Automatic 1 (change of mass less than 1 mg in 20 s)
• Automatic 2 (change of mass less than 1 mg in 50s)
• Automatic 3 (change of mass less than 1 mg in 120s)
• Automatic 4 (change of mass less than 1 mg in 180s)
• Automatic 5 (change of mass less than 1 mg in 240s)
• User defined
• User defined 2
• Test
• Manual
• Time-controlled (1 min – 9h 59 min)
Sample plates included
10 (Ø 92 mm)
Display after drying
(*SG = Starting weight g)
Humidity [%] = weight loss (WL) from SG* 0 – 100 %
Dry matter [%] = residual weight (RW) from SG* 100 – 0 %
ATRO [%] [ (SG – RG) : RG ] x 100% 0 – 999 %
Residual weight [g] (RW) Absolute value in [g]
Display can be changed any time
Interface/RS232
Print-out in the selected language
Dimensions
210 x 335 x 180 mm
Net weight
6 kg
Electr. source
220-230VAC /50-60Hz or 115VAC
[ONLY to be modified by specialist]
To Next Page
Loading...
