KERN MLS 50-3IR160 - 11 Set Drying Parameters; Select Profile

MLS-BA-defsi-0713
11
7
11 Set drying parameters
If the program library is deactivated the parameters can be freely entered.
11.1 Select profile
Operator Indication
Ö Turn on MLS 50-3 on main switch (rear side)
Ö Press the -key
Ö Actuate the -key, selection profiles is opened
Ö Actuate the -key, use the cursor (►) to select
the desired parameter (e.g. “Profile“)
Ö Push -button
Select and save settings:
Use the
, keys and (Enter) to select the
desired heating method.