KERN MLS 50-3IR160 - Select Interval of Data Output

MLS-BA-defsi-0713
113
9.5 Select interval of data output
The user can determine which interval is used for data output.
Operator indication
Ö Actuate -key, use the cursor (►) to select the
desired parameter (e.g. “Printout interval“)
Ö Actuate the -key to open selection “Printout
time“
The following selection criteria are available:
Ö Printout after 1 second – 5 minutes selectable
Ö No printout
Select and save settings:
Use the , keys and (Enter) to select the
desired printout times.