9 Operator menu
Execution of a moisture determination
On the following pages the setting of the individual drying parameters and the
execution of a drying process is described.
Important drying parameters:
¾ Drying profiles (Temperature, time)
¾ Criteria for completing the drying process
¾ Selection displayed calculation result
¾ Output interval
9.1 Program library
The MLS50-3 has a memory for drying processes! This memory (library) can store 99
drying processes. The completed processes can be simply called up and started from
the library. Activating the program library:
Operator Indication
Ö Push -button
Ö Actuate the -key; use the cursor (►) to select
setting “P7 Other“
Ö Push -button
Ö Push -button
Ö Actuate -key; use the cursor (►) to select
setting “P7 02 program library“
Ö Actuate the -key; the setting in the function will
start blinking. Use or to change the setting
between “1=yes“ and “0=no“.
Ö Select setting “1=yes“
Ö Push -button
Ö Actuate -key twice now
Ö Use the -key to save the setting; with the -
key the old setting remains valid.
To Next Page
Loading...
